Operating InstructionsSwivelling quickrelease fasternerfor VEGAPULS 66 Clamp 3"Document ID:41775Radar
4 Mounting4.1 Safety instructionsAlways keep in mind the following safety instructions:l Dismount the fitting only in unpressurized conditionl The safe
The marking must be in one plane together with the vent hole of thestandpipe, or in the case of angled standpipes, with the bending axis.Align the rad
5 Setup5.1 Separate ordering of sensor and fittingSetup of VEGAPULS 66 is carried out according to the operatinginstructions manual of the sensor.When
12Fig. 6: Sensorreference plane when sensor and fitting are ordered together1 Reference plane2 Height of the fitting up to the reference plane5.3 Adjust
6 Operation6.1 HandlingThe fitting is unlocked by pulling out the lock bolt. The radar sensor isreleased by pressing the clamping sleeve down.123Fig. 8
6.3 Bring the radar sensor back into position"Operation"Proceed as follows:1 Press down the clamping sleeve and keep it pressed2 Swivel in t
7 Maintenance and fault rectification7.1 MaintenanceIf the instrument is used properly, no special maintenance is requiredin normal operation.7.2 Recti
3 Remove the seals from the base part and replace them with newonesCaution:The seals must not be damaged4 Swivel in the radar sensor as described abov
8 Dismounting8.1 Dismounting stepsCaution:The vessel must be unpressurized before dismounting the fitting andthe radar sensor mus t be removed.Take not
9 Supplement9.1 Technical dataGeneral dataWetted material- Fitting 316L- Clamp seal FKM- Cone seals NBRProduct temperature -40 … +150 °C (-40 … +302 °
Contents1 About this document1.1 Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41.2 Target group . . . . . . . . . . . .
9.2 Dimensionsø 107 mm(4.21")234 mm / 223 mm(9.21" / 8.78")ø 125 mm(4.92")ø 165 mm(6.5")DN 50 PN16152,5 mm (6.00")101,5
Swivelling quick release fasterner • for VEGAPULS 66 Clamp 3" 219 Supplement41775-EN-121018
22 Swivelling quick release fasterner • for VEGAPULS 66 Clamp 3"9 Supplement41775-EN-121018
Swivelling quick release fasterner • for VEGAPULS 66 Clamp 3" 239 Supplement41775-EN-121018
VEGA Grieshaber KGAm Hohenstein 11377761 SchiltachGermanyPhone +49 7836 50-0Fax +49 7836 50-201E-mail: [email protected] date:ISO 9
2012-09-26Swivelling quick release fasterner • for VEGAPULS 66 Clamp 3" 3Contents41775-EN-121018
1 About this document1.1 FunctionThis operating instructions manual provides all the information youneed for mounting, connection and setup as well as
2 For your safety2.1 Authorised personnelAll operations described in this operating instructions manual must becarried out only by trained specialist
2.5 Safetylabel on the instrumentThe safety approval markings and safety tips on the device must beobserved.2.6 Environmental instructionsProtection o
3 Product description3.1 ConfigurationThe scope of delivery encompasses:l Swivelling quick-release fastenerl Clamp connection 3"l Clamp seall Blin
l Without horn antenna for standpipel Process fitting Clamp 3"The fitting can be adjusted to three positions:l Operationl Extendedl SwivelledIn pos
The delivery must be checked for completeness and possible transitdamage immediately at receipt. Ascertained transit damage orconcealed defects must b
Comments to this Manuals