Vega PLICSMOBILE T61 User Manual download pdf (Page 27)

7 Setup

PLICSMOBILE T61 • External GSM/GPRS radio unit

37700-EN-130228

When PLICSMOBILE is in power saving mode, a login procedure can

betriggeredbybrieypushingthetestkey.Theusercanthuscheck

via the status LED whether a login into the GSM network is possible.

7.5 Internet connection and measured value

transmission

The transmission of measured values via e-mail or to the visualization

software WEB-VV is always based on an Internet connection. Access

data (user name/password) are required for this connection. With

a GSM connection, a dial-in number is also required; with a GPRS

connection, the APN (Access Point Name) must be given. You can get

this information from your mobile phone provider. Further information

and a list of common mobile phone providers with their access data

can be found in the online help of the PLICSMOBILE DTM.

Fig. 13: Entering the Internet access data

The measured values can be transmitted optionally in the following

ways:

•

Via integrated mail client to any e-mail address

•

Via SMS to any mobile phone

•

Via http to the visualization software WEB-VV

UndertheDTMmenuitem"Event list"thereisaconvenientassistant

for setting up measured value transmission. The measured values can

betransmittedatindividuallydenabletimesorintervals.Amessage

can also be triggered when a certain level is exceeded or underrun.

In addition, a status-controlled measured value transmission can be

carried out, for example when a fault signal occurs.

Test key

Internet connection (Dial-

Out)

Measured value transmis-

sion

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

No comments

Vega PLICSMOBILE T61 User Manual Page 27