Vega PLICSMOBILE T61 User Manual download pdf (Page 26)

7 Setup

PLICSMOBILE T61 • External GSM/GPRS radio unit

37700-EN-130228

Note:

The electronics must be voltage-free when inserting the SIM card. To

ensurethis,theentirevoltagesupplymustbeswitchedo.Thisin-

cludes disconnecting a battery and USB cable that might be installed.

Take ESD protective measures when handling the SIM card. Electro-

static discharges can damage the SIM card or the PLICSMOBILE.

Fig. 12: Insert SIM card

To avoid misuse, the SIM card is generally locked by a PIN. To ensure

thatPLICSMOBILEcancontacttheselockedSIMcards,rstofall

thePINmustbeentered.Forthispurposetheassistant"Activate SIM

card"isavailableintheDTM.EnterherethecorrectPINforthecard.

TheassistantalsooerstheoptionofchangingthePIN.

Thencheckifthecardisloggedintothenetworkandifsucient

network coverage (signal strength) exists. This can be checked in the

DTMmenu"Network information"under"Setup - Diagnosis".Yo ucan

also see the general device status via the status indication.

The following operating conditions are signalled via the LED status

indication:

•

LED does not light: no operating voltage or power saving mode

active

•

Constantashing: Instrument is not logged into the GSM net-

work

•

Unsteadyashing(longOFF/shortON): instrument is booked

into the GSM network

•

Continuous light: Transmitting or dia-up connection (via CSD)

active

Activate SIM card

Status indication

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

No comments

Vega PLICSMOBILE T61 User Manual Page 26