Vega VEGACAP 98 - Relay (DPDT) User Manual

Operating InstructionsCapacitive rod electrode for level detectionVEGACAP 98- Relay (DPDT)Document ID: 33760

104 MountingVEGACAP 98 • - Relay (DPDT)33760-EN-1309164 Mounting4.1 General instructionsMake sure that all parts of the instrument coming in direct c

114 MountingVEGACAP 98 • - Relay (DPDT)33760-EN-1309164.2 Mounting instructionsIftheinstrumentismountedinthellingstream,unwantedfalsemeas

125 Connecting to power supplyVEGACAP 98 • - Relay (DPDT)33760-EN-1309165 Connecting to power supply5.1 Preparing the connectionAlways keep in mind

136 SetupVEGACAP 98 • - Relay (DPDT)33760-EN-1309166 Setup6.1 General informationTheguresinbracketsrefertothefollowingillustrations.Onthee

146 SetupVEGACAP 98 • - Relay (DPDT)33760-EN-130916ToadjustVEGACAP98,loosenrstofallthefourscrewsontheup-per side of the instrument with

156 SetupVEGACAP 98 • - Relay (DPDT)33760-EN-1309163. Turnthebelowpotentiometer(6)rstofallanticlockwise(max.20turns)untilthecontrolla

166 SetupVEGACAP 98 • - Relay (DPDT)33760-EN-130916Level Switching status Control lampMode BDry run protection53 4(8)(6) (7)RelayenergizedMode BDry r

177MaintenanceandfaultrecticationVEGACAP 98 • - Relay (DPDT)33760-EN-1309167 Maintenanceandfaultrectication7.1 MaintenanceIf the instrument

187MaintenanceandfaultrecticationVEGACAP 98 • - Relay (DPDT)33760-EN-1309166743CPHCM2 MΩ2 MΩ2 MΩ321Fig. 21: Check the resistance in the probe1 C

197MaintenanceandfaultrecticationVEGACAP 98 • - Relay (DPDT)33760-EN-130916Iftheresistancevalueis>3Ω,thiscanbeduetocorrosionont

2ContentsVEGACAP 98 • - Relay (DPDT)33760-EN-130916Contents1 About this document1.1 Function ...

207MaintenanceandfaultrecticationVEGACAP 98 • - Relay (DPDT)33760-EN-1309166. Loosen the two screws with a Torx screwdriver.7. Open the tensile

218 DismountingVEGACAP 98 • - Relay (DPDT)33760-EN-1309168 Dismounting8.1 Dismounting stepsWarning:Before dismounting, be aware of dangerous process

229 SupplementVEGACAP 98 • - Relay (DPDT)33760-EN-1309169 Supplement9.1 Technical dataGeneral dataMaterial 316L corresponds to 1.4404 or 1.4435Materi

239 SupplementVEGACAP 98 • - Relay (DPDT)33760-EN-130916 Ʋ Max. 750 VA AC, 54 W DCIf inductive loads or stronger currents are switched through, the go

249 SupplementVEGACAP 98 • - Relay (DPDT)33760-EN-130916Electrical protective measuresProtection rating IP 66/IP 67Overvoltage category IIIProtection

259 SupplementVEGACAP 98 • - Relay (DPDT)33760-EN-1309169.3 Industrial property rightsVEGA product lines are global protected by industrial property

26NotesVEGACAP 98 • - Relay (DPDT)33760-EN-130916

27NotesVEGACAP 98 • - Relay (DPDT)33760-EN-130916

Printing date:VEGA Grieshaber KGAm Hohenstein 11377761 SchiltachGermany33760-EN-130916All statements concerning scope of delivery, application, practi

3ContentsVEGACAP 98 • - Relay (DPDT)33760-EN-130916Supplementary documentationInformation:Supplementary documents appropriate to the ordered version c

41 About this documentVEGACAP 98 • - Relay (DPDT)33760-EN-1309161 About this document1.1 FunctionThis operating instructions manual provides all the

52 For your safetyVEGACAP 98 • - Relay (DPDT)33760-EN-1309162 For your safety2.1 Authorised personnelAll operations described in this operating inst

62 For your safetyVEGACAP 98 • - Relay (DPDT)33760-EN-1309162.5 Safety label on the instrumentThe safety approval markings and safety tips on the dev

73 Product descriptionVEGACAP 98 • - Relay (DPDT)33760-EN-1309163 Product description3.1 CongurationThe scope of delivery encompasses:• VEGACAP 98

83 Product descriptionVEGACAP 98 • - Relay (DPDT)33760-EN-130916VEGACAP 98 is very rugged and maintenance-free and can be used in all areas of industr

93 Product descriptionVEGACAP 98 • - Relay (DPDT)33760-EN-1309163.3 OperationThe probe can be adapted to the dielectric constant of the product direct